Hidden water damage behind walls
We use thermal imaging cameras and moisture meters to find water behind walls without tearing everything out. Once we map the damage, we dry the cavity and repair only what is wet. This saves time and money.
When water damage restoration services Naples FL homeowners call first, we answer 24/7 and roll trucks across Collier County within the hour. Whether it is a pipe burst at 2 a.m. in Olde Naples or storm surge in Vanderbilt Beach, our IICRC-certified technicians extract standing water, dry the structure, and repair what is wet. One call handles it all.

Water damage restoration services Naples FL is the process of extracting standing water, drying structural materials, and repairing everything from soaked drywall to warped hardwood. We start with a moisture meter and thermal imaging camera to map exactly where water traveled, then pull it out with truck-mounted extraction units. Air movers and dehumidifiers run until readings hit dry standard. We handle the repairs too, so you are not juggling three contractors.
Naples properties face water damage from slab leaks, pipe bursts, roof leaks, and hurricane flooding. The summer wet season dumps rain for months, and storm surge pushes water into ground-floor condos along the coast. If you search for water damage restoration services near me Naples FL after a storm, you need a crew that knows how local buildings are constructed. We do.
Every water damage job is different, but most include the same core services. Here is what you get when you hire us. If your job needs something outside this list, we will tell you upfront and price it separately.
We remove standing water with truck-mounted extraction units and sump pumps. This stops the spread and reduces how much material gets ruined. Extraction usually takes two to four hours depending on water volume.
Air movers and dehumidifiers dry walls, floors, and subflooring. We monitor moisture daily and adjust equipment until readings hit dry standard. Most jobs dry in three to five days.
We apply antimicrobial solution to wet surfaces to prevent mold growth after water damage. This is standard on every job. It is not a substitute for remediation if mold is already present, but it stops new growth.
If mold is found, we remove it, treat the area, and fix the moisture source. We carry Florida Mold-Related Services License (MRSA) and follow IICRC AMRT standards. This is included when needed.
We replace drywall, baseboards, insulation, paint, and flooring. If structural repairs are needed, we handle those too. You get one contractor for the whole job, not a handoff to someone else.
We photograph everything, log moisture readings, and prepare Xactimate estimates. Your adjuster gets a complete package. This speeds up claim approval and reduces back-and-forth.
You call, we answer. A dispatcher collects your address, the source of water, and whether it is still flowing. We give you immediate steps: shut off the main if you can, avoid electrical panels, and move valuables off the floor. A crew is dispatched while you are still on the phone.
A technician arrives and walks the property with a moisture meter and thermal imaging camera. We identify the source, map the water migration, and check for hidden damage behind walls using a borescope inspection camera. You get a written scope of work and an upfront price before we start.
Truck-mounted water extraction units pull standing water from carpet, hardwood, and subflooring. For deep water or sewage backups, we use sump pumps first. Extraction typically takes two to four hours depending on volume. We remove wet carpet padding and absorbent pads that cannot be saved.
We set air movers and dehumidifiers to dry the structure. Drying usually takes three to five days. We monitor moisture readings daily and adjust equipment placement. Hardwood floor drying mats pull moisture from wood planks without tearing them out. You get daily updates on progress.
Once readings hit dry standard, we repair what was damaged. That means new drywall, baseboards, insulation, paint, and flooring. We also apply antimicrobial solution to prevent mold growth after water damage. You walk the finished job with us and sign off only when you are satisfied.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Finds hidden moisture behind walls, under floors, and in ceilings without tearing anything out. We use it during inspection and daily monitoring.
Measures moisture content in drywall, wood, and concrete. We use readings to determine when materials hit dry standard and drying is complete.
Circulates air across wet surfaces to speed evaporation. We place them strategically to create a drying chamber. Most jobs use 10 to 20 units.
Pulls moisture from the air so wet materials can dry. We use desiccant and refrigerant units depending on the job. They run 24/7 until dry standard is reached.
Truck-mounted units pull standing water from carpet, hardwood, and subflooring. They remove hundreds of gallons fast.
Lets us see inside wall cavities without cutting large holes. We use it to check for hidden water damage and mold.
Pulls moisture from hardwood planks without tearing them out. This saves floors that would otherwise need replacement.
A supply line burst under the kitchen sink and ran for hours before the homeowner woke up. Water spread across 600 square feet of hardwood and soaked the bottom of the drywall. The homeowner called us at 6 a.m.
We extracted 40 gallons of standing water, set 12 air movers and 3 dehumidifiers, and dried the structure in four days. Hardwood floor drying mats saved the wood floors. We replaced 8 feet of drywall and repainted. Total job: five days.
Hurricane storm surge pushed 3 inches of saltwater into a ground-floor condo. Carpet, padding, and baseboards were soaked. The homeowner was out of town and a neighbor called us.
We extracted the water, removed wet carpet and padding, and dried the concrete and drywall. We treated for mold and replaced baseboards and carpet. The condo was back to normal in 12 days. Insurance covered most of the cost.
A slab leak under the living room floor soaked the carpet and subflooring. The homeowner noticed a warm spot and rising water bill. We located the leak with thermal imaging and acoustic detection.
We repaired the copper pipe, extracted water, and dried the subfloor. Carpet and padding were replaced. The job took eight days including the plumbing repair. The homeowner avoided a full floor replacement.
Water damage shows up in different ways. Here are the most common problems we fix for Naples property owners.
Ask a pro →We use thermal imaging cameras and moisture meters to find water behind walls without tearing everything out. Once we map the damage, we dry the cavity and repair only what is wet. This saves time and money.
We extract water from carpet and padding, then dry in place when possible. If the padding is contaminated or too far gone, we remove and replace it. Most carpet dries in two to three days.
We apply antimicrobial solution during drying to stop mold before it starts. If mold is already present, we remediate it following IICRC AMRT standards. We also fix the moisture source so it does not come back.
We find the leak, repair it, and dry the ceiling cavity. If drywall is damaged, we replace it and repaint. We also check the attic for hidden moisture and mold.
$1,200 - $6,500 for most residential jobs; larger jobs with mold or reconstruction can exceed $10,000
Most water damage restoration jobs in Naples run $1,200 to $6,500 for residential properties. Small jobs like a single-room pipe burst might cost $1,500. Large jobs with mold remediation and reconstruction can exceed $10,000. We give you a written price before we start. If insurance covers the job, we bill them directly. Typical 2026 pricing in this area reflects material costs and labor rates.
Water damage gets worse by the hour. Fixing it fast costs less than waiting. We give you an upfront price, handle insurance, and finish the job so you are not paying twice.
Clean water from a supply line costs less to remediate. Contaminated water from sewage or flooding requires removal of more materials and antimicrobial treatment. Category 3 water can double the cost.
The more area that is wet, the more equipment and labor required. A single room is cheaper than a whole floor. We measure affected areas during inspection.
Carpet and padding are cheaper to replace than hardwood or tile. Drywall repair adds cost. If cabinets or trim are damaged, that increases the scope.
If mold is present, remediation adds cost. We set up containment, run negative air machines, and remove affected materials. This is required when mold is found.
“A pipe burst under our kitchen sink at 11 p.m. We called and a crew was here in under an hour. They extracted the water, set up dryers, and had everything back to normal in four days. The insurance paperwork was handled for us. I cannot recommend them enough.”
Maria G.Homeowner, Olde Naples
✓ Verified“Storm surge flooded our ground-floor condo. These guys were on site the next morning. They pulled wet carpet, dried the walls, and treated for mold. The whole job took about two weeks. They kept us updated every day and worked directly with our adjuster.”
David R.Condo Owner, Pelican Bay
✓ Verified“We manage several rental properties and have used this team multiple times. They are fast, professional, and they document everything. Our owners never push back on the invoices because the photos and moisture logs are all there. They are our go-to for water damage.”
Susan M.Property Manager, North Naples
✓ VerifiedWater damage restoration in Naples includes water extraction, structural drying, dehumidification, antimicrobial application, and repairs. We also handle mold remediation if growth is found. The scope covers everything from pulling wet carpet to replacing drywall and baseboards. You get one team for the whole job.
Most residential jobs run $1,200 to $6,500 depending on water category, square footage, and materials affected. A small pipe burst might cost $1,500. A flooded condo with hardwood and drywall damage can hit $8,000 or more. We give you a written price before work begins.
Yes, if water has been sitting for more than a few hours or has soaked into walls, floors, or insulation. Mold can start within 24 to 48 hours. A shop vac cannot dry structural materials. You need commercial dehumidifiers and air movers to hit dry standard and prevent long-term damage.
Extraction takes two to four hours. Drying typically runs three to five days. Repairs add another three to ten days depending on scope. A small leak might wrap up in a week. A flooded condo with mold remediation can take two to three weeks. We give you a timeline upfront.
Water spreads fast. Every hour you wait means more damage and higher repair costs. Our IICRC-certified crews are on call 24/7 and ready to dispatch. One call and we handle the rest.
Get Emergency Help +17253098505 →Call us any time, day or night, at +1 (725) 309-8505. Our dispatchers are available 24/7 and can have a crew at your door within about an hour for emergencies in Naples and surrounding areas. You can also email us at info@waterdamagerestoration.com or stop by our office during business hours.