Musty odor with no visible mold
We use thermal imaging and air sampling to locate the source. Our lab identifies the species and spore count. Once we know where it is, we give you a scope for remediation. You stop guessing and start fixing.
When you need mold inspection and testing Naples FL homeowners rely on, we bring thermal imaging cameras, moisture meters, and a certified mold inspector to your door. We test the air, swab visible growth, and check behind walls for hidden mold after leaks, storms, or humidity spikes. You get lab results in 24-48 hours and a clear plan. Call +1 (725) 309-8505.

Mold inspection and testing Naples FL is a diagnostic service that locates mold growth, identifies the species, and measures airborne spore counts before you spend money on remediation. A certified mold inspector walks the property with a thermal imaging camera and moisture meter, checking baseboards, drywall, insulation, and subflooring for elevated readings. We collect air samples with a calibrated pump and surface samples with sterile swabs, then send everything to an accredited lab. You get a written report with spore counts, photos, and a scope of work.
Naples properties face mold pressure year-round. Summer humidity sits above 70% for months, afternoon thunderstorms push water through roof leaks and window frames, and hurricane season can leave storm surge or flooding in low-lying areas. If you have had a pipe burst, slab leak, or sewage backup, mold can colonize wet drywall and carpet padding within 24 to 48 hours. That is why mold testing after water damage Naples is not optional. We also handle mold inspection for home purchase Naples FL so buyers know exactly what they are getting before closing.
Every mold inspection and testing Naples FL job includes a full visual inspection, moisture mapping, air and surface sampling, lab analysis, and a written report. We also offer optional add-ons like HVAC mold testing and crawl space inspections.
We inspect every room, attic, crawl space, and HVAC closet. We look for visible mold, water stains, and conditions that support growth. We use thermal imaging cameras and moisture meters to find hidden moisture behind walls and under floors.
We collect air samples with a calibrated pump and surface samples with sterile swabs. Each sample is labeled and sent to an accredited lab. We also take an outdoor baseline sample for comparison. This gives you a complete picture of your indoor air quality.
The lab identifies mold species and spore counts. You get a written report with photos, moisture maps, and lab results. We call you to explain the findings and answer questions. The report is suitable for insurance claims, real estate transactions, and your records.
We map moisture readings across your home using a moisture meter and infrared thermometer. This shows where water is trapped and how far it has spread. Moisture mapping guides remediation and helps prevent future mold growth.
If mold is present, we provide a written scope of work detailing affected areas and recommended remediation steps. You can use this to get bids from licensed mold remediators. We do not perform remediation, so there is no conflict of interest.
You call +1 (725) 309-8505 and describe what you are seeing or smelling. Musty odors, ceiling water stains, or recent water damage all point to different testing approaches. We ask about the age of your home, any past leaks, and whether you have had flooding. We schedule a visit, usually within 24 to 48 hours.
A certified mold inspector walks the property with a thermal imaging camera, moisture meter, and infrared thermometer. We check every room, the attic, crawl space, and HVAC system. We look for moisture intrusion points, visible growth, and conditions that support mold. This takes 30 to 60 minutes for a typical Naples home.
We collect air samples using a calibrated pump and surface samples with sterile swabs. Air samples capture airborne spores; surface samples identify what is growing on materials. We also take an outdoor baseline sample for comparison. Each sample is labeled, sealed, and sent to an accredited lab the same day.
The lab cultures your samples and identifies mold species and spore concentrations. Results come back in 24 to 48 hours. You get a report showing indoor versus outdoor spore counts, the dominant species, and whether levels indicate a mold problem. We call you to walk through the findings before you read the report.
We deliver a written report with photos, moisture maps, lab results, and a scope of work. If mold is present, we explain remediation options and can connect you with licensed mold remediators. If your home is clear, you have documentation for real estate, insurance, or your own records. Either way, you know exactly where you stand.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Detects temperature differences behind walls to find hidden moisture and mold growth without tearing into drywall.
Measures moisture content in drywall, wood, and insulation. We use it to map wet areas and confirm drying is complete.
Lets us see inside wall cavities, HVAC ducts, and crawl spaces. We find mold in places a visual inspection cannot reach.
Collects calibrated air samples for lab analysis. We capture airborne spores and compare indoor levels to outdoor baseline.
Spot-checks surface temperatures to identify areas prone to condensation and mold growth.
Used during remediation to remove mold spores from surfaces and air. We do not use it during inspection, but we recommend it for cleanup.
Reduces humidity to prevent mold growth after water damage. We use Dri-Eaz and Phoenix Restoration Equipment dehumidifiers.
A homeowner in Coquina Sands smelled musty odors in the guest room for weeks. No visible mold. A previous contractor told them it was nothing. They called us for mold testing in Coquina Sands.
Thermal imaging found moisture behind the baseboard from a slow AC leak. Lab results confirmed elevated aspergillus spores. We scoped remediation, and the homeowner had the wall opened, cleaned, and repaired. The odor was gone in a week.
After a hurricane, a Park Shore homeowner had a roof leak that stained the ceiling. The stain dried, but they worried about mold. They scheduled mold inspection in Park Shore.
We found elevated mold spores in the attic insulation. The lab report showed penicillium and cladosporium. We provided a scope, and the homeowner had the insulation replaced and attic treated. Clearance testing confirmed no mold remained.
A buyer was under contract on an Olde Naples home. The inspection report noted a past water stain near a window. They ordered mold inspection for home purchase Naples FL.
Air samples showed normal spore counts, but surface sampling found dormant mold on the window frame. We documented it, and the buyer negotiated a credit for remediation. They closed with confidence.
Mold inspection and testing near me Naples FL calls often start with a smell, a stain, or a recent water event. Here are the most common problems we solve.
Ask a pro →We use thermal imaging and air sampling to locate the source. Our lab identifies the species and spore count. Once we know where it is, we give you a scope for remediation. You stop guessing and start fixing.
We inspect the affected area with moisture meters and thermal cameras. We collect air and surface samples to confirm mold presence. If mold is found, we scope remediation before you repair. Testing after water damage is the only way to know your walls are clean.
We provide mold inspection for home purchase Naples FL buyers. We test air and surfaces, document findings, and deliver a report you can use in negotiations. If mold is present, you know the scope and cost before you sign.
We test after flood cleanup to confirm no mold remains. We check air and surfaces, compare to outdoor baseline, and provide a clearance report. You get documentation for insurance and peace of mind before you rebuild.
$300 - $800 depending on scope
Typical 2026 pricing for mold inspection and testing Naples FL runs $300 to $650 for a standard home. Larger homes, additional samples, or emergency calls may push toward $800. The price includes on-site inspection, air and surface sampling, lab analysis, and a written report. We give you a flat quote before we schedule. No hidden fees. If you need mold testing after water damage Naples, we can often bundle it with water damage restoration for a discounted rate.
You get lab-backed results, a written report, and a scope of work. That documentation is valuable for insurance claims, real estate transactions, and your own peace of mind. Catching mold early saves thousands in structural repairs.
Larger homes require more samples and take longer to inspect. A 1,500-square-foot home may need 2-3 air samples, while a 4,000-square-foot home may need 5-6. More samples mean higher lab fees.
Each air or surface sample costs $50 to $100 in lab fees. If we suspect mold in multiple areas, we collect more samples. We discuss sample count with you before we collect.
Emergency calls after flooding or a pipe burst may incur an after-hours fee. We prioritize these calls because mold can start in 24 to 48 hours. We tell you the fee upfront.
If we test your HVAC system for mold, that adds $100 to $200. HVAC mold is common in Florida and can spread spores through your home. We recommend it if you have musty odors when the AC runs.
“We smelled something musty in the guest room for weeks. The team came out, used thermal imaging, and found mold behind the baseboard from a slow AC leak. Lab results confirmed it in two days. They gave us a scope and we had it remediated. Professional and thorough.”
Maria G.Homeowner, Coquina Sands
✓ Verified“After Hurricane Ian, we had water come in through the roof. They tested for mold before we rebuilt. The report showed elevated spores in the attic. We would have never known. They saved us from a much bigger problem down the road. Highly recommend.”
David R.Homeowner, Park Shore
✓ Verified“I use them for mold inspection for home purchase Naples FL clients. They are fast, reliable, and the reports are detailed. My buyers trust the lab results. It has helped close deals and caught issues before closing. They are my go-to for mold testing in Naples.”
Linda P.Real Estate Agent, Olde Naples
✓ VerifiedMost mold inspection and testing Naples FL jobs run $300 to $650 for a standard home, with larger properties or additional samples pushing toward $800. The price includes the on-site inspection, air and surface samples, lab analysis, and a written report. If you need mold testing with lab results Naples wide, that is always included. We give you a flat quote before we schedule, so there are no surprises.
The on-site portion takes 1.5 to 3 hours for a typical Naples home. Lab results come back in 24 to 48 hours. For emergency calls after flooding or a pipe burst, we can often schedule same-day or next-day. The full process from call to report is usually 2 to 4 days. Larger commercial properties may take longer depending on square footage and sample count.
Yes, if water sat for more than 24 hours or you smell musty odors. Mold can colonize drywall, insulation, and carpet padding within 24 to 48 hours of water intrusion. Even if you dried the area yourself, hidden moisture behind baseboards or under subflooring can feed mold for weeks. Testing confirms whether mold is present and gives you documentation for insurance claims.
Yes. We use thermal imaging cameras and borescope inspection cameras to see behind walls, under floors, and inside HVAC chases. Air samples capture spores from hidden growth. If you have a musty smell but no visible mold, testing is the only way to confirm what is growing and where. We have found mold behind baseboards, in crawl spaces, and inside wall cavities that a visual inspection missed.
Do not wait for mold to spread. Call +1 (725) 309-8505 and we will schedule your inspection, usually within 24 to 48 hours. You get lab results in 24 to 48 hours and a clear report. Licensed, insured, and local.
Book Inspection +17253098505 →Call us any time, day or night, at +1 (725) 309-8505. Our dispatchers are available 24/7 and can have a crew at your door within about an hour for emergencies in Naples and surrounding areas. You can also email us at info@waterdamagerestoration.com or stop by our office during business hours.