When a pipe lets go, every minute soaks deeper into your walls and floors. Our pipe burst cleanup and repair Naples FL team responds 24/7, shuts down the source, extracts standing water, and dries the structure before mold gets a foothold. We handle burst pipe water damage restoration for homes and businesses across Collier County, from slab leaks to attic supply lines.
Pipe burst cleanup and repair Naples FL is the full-service process of stopping an active leak, removing the water it released, drying every affected material, and restoring the pipe and the structure around it. It is not just a mop-and-fan job. We use thermal imaging cameras to find moisture hiding behind drywall, moisture meters to confirm readings, and commercial air movers paired with dehumidifiers to pull water out of the air before it migrates into adjacent rooms.
Naples homes see burst pipes from three main sources: aging copper supply lines in older downtown properties, irrigation and pool lines that fail under pressure, and sudden temperature drops that freeze exposed piping in unheated garages or attics. When you search for pipe burst cleanup and repair near me Naples FL, you need a crew that can be on site the same day. We also handle pipe burst cleanup and repair for slab leaks Naples FL, where the leak is under the foundation and the damage spreads silently.
Every pipe burst job is different, but our standard scope covers the essentials: stopping the leak, removing the water, drying the structure, repairing the pipe, and restoring the affected materials. Here is what you can expect us to handle from start to finish.
We remove standing water using truck-mounted extraction units and portable pumps. This includes water in carpet, padding, hard floors, and any visible pooling. We work fast to limit how far the water spreads.
We use thermal imaging cameras and moisture meters to find hidden water in walls, ceilings, and floors. We log readings daily and adjust drying equipment until the structure meets the dry standard.
Air movers and dehumidifiers run for three to five days, depending on the scope. We place them based on the moisture map, not guesswork, and we monitor progress every day until the job is dry.
We cut out the failed section and repair or replace the pipe. That may mean soldering copper, replacing a fitting, or addressing a slab leak. We pressure-test the line before closing up the wall or floor.
We replace drywall, insulation, baseboards, and paint as needed. If carpet padding was soaked, we remove and replace it. The goal is to return the space to its pre-loss condition.
We provide photos, moisture readings, and an Xactimate scope to support your claim. We work with your adjuster to make sure the documented damage matches what we found on site.
You call, we dispatch. Our team arrives with extraction equipment and moisture detection tools. First priority is shutting off the water at the main or the nearest isolation valve, then confirming the leak is stopped. We assess the affected area and give you a clear scope before we start pulling water.
We use truck-mounted extraction units for carpet and hard floors, and portable sump pumps for deeper standing water. Absorbent pads go down in tight corners. Depending on the volume, extraction takes one to three hours. We check moisture readings as we go so we know when the bulk water is out.
Air movers and dehumidifiers go in to dry the structure. We place them based on the moisture map, not just where the water was visible. Drying typically runs three to five days. We monitor daily with moisture meters and infrared thermometers, adjusting equipment until every reading is back to a normal dry standard.
Once the area is dry enough to work safely, we repair the failed pipe. That may mean cutting out a corroded section of copper, replacing a fitting, or addressing a slab leak. We pressure-test the line before closing anything up. Most pipe repairs are completed in a single day.
We replace drywall, insulation, baseboards, and paint as needed. If carpet padding was soaked, we remove and replace it. At the end, we walk the job with you, show you the final moisture readings, and confirm the pipe holds pressure. You get a dry, restored space and documentation for your records.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Detects temperature differences to find hidden moisture behind walls, under floors, and in ceilings without cutting into the structure.
Measures moisture content in drywall, wood, and other materials. We use it to map the affected area and confirm when the structure is dry.
High-velocity fans that circulate air across wet surfaces to speed evaporation. We place them based on the moisture map for maximum efficiency.
Pulls moisture out of the air so it does not re-condense on surfaces. We use Dri-Eaz and Phoenix Restoration Equipment units for reliable performance.
Truck-mounted and portable units that remove standing water from carpet, hard floors, and tight spaces quickly.
Lets us see inside wall cavities and pipes without major demolition, so we can confirm the leak source and check for hidden damage.
Draws moisture out of hardwood floors without causing warping or cupping, saving the floor when it would otherwise need replacement.
A supply line under the kitchen sink burst at 6 a.m., flooding the kitchen, hallway, and part of the living room. Water soaked into the hardwood and baseboards, and the homeowner could not find the main shut-off valve.
We shut off the water, extracted 40 gallons, and dried the hardwood with floor drying mats. The pipe was repaired, baseboards replaced, and the hardwood saved. Moisture readings were back to normal in four days.
A slab leak went undetected for weeks, causing warm spots on the tile floor and a water bill that tripled. The homeowner noticed mold starting to grow at the baseboard in the adjacent room.
We located the leak with thermal imaging, repaired the pipe, and dried the subfloor and walls. The mold was treated with antimicrobial solution, and the baseboards were replaced. The floor was dry in five days.
During a cold snap, a pipe in the attic burst and sent water through the ceiling into a bedroom. The ceiling drywall was sagging, insulation was soaked, and the carpet was wet.
We removed the wet drywall and insulation, extracted the water from the carpet, and dried the ceiling structure. The pipe was repaired, new insulation and drywall installed, and the ceiling repainted. The room was back to normal in 10 days.
A burst pipe creates a chain reaction of problems if it is not handled correctly. Here are the most common issues we see in Naples and how we solve them.
Ask a pro →We use thermal imaging cameras and moisture meters to map exactly where the water went. Then we dry those areas with air movers and dehumidifiers, not just the visible wet spots. That stops mold before it starts.
We locate slab leaks with acoustic listening equipment and thermal imaging, then repair the pipe and dry the surrounding structure. For pipe burst cleanup and repair for slab leaks Naples FL, we handle both the pipe and the water damage.
We dry the structure fast and use antimicrobial solution on affected materials. If mold is already present, our Florida Mold-Related Services License (MRSA) team handles remediation and restores the space to a clean condition.
We document everything with photos, moisture readings, and an Xactimate scope. That gives your adjuster the evidence needed to process the claim accurately and helps you recover what you are owed.
$1,200 - $4,500 depending on scope
Typical 2026 pricing for pipe burst cleanup and repair in Naples ranges from $1,200 to $4,500 for most residential jobs. The low end covers a small leak that stays in one room. The high end covers a slab leak or a multi-room loss with significant restoration. Pipe repair alone is often $300 to $900. We provide a clear scope and upfront pricing before we start, so you know what you are paying for.
The cost of cleanup and repair is almost always less than the cost of ignoring a burst pipe. Mold remediation, structural repairs, and foundation damage can run into tens of thousands. Handling it fast protects your property and your wallet.
More water means more extraction time, more drying equipment, and a longer drying period. A burst that releases 50 gallons is a different job than one that releases 500.
Carpet and padding are easier to dry or replace. Hardwood, tile, and drywall require more specialized drying and may need replacement, which increases cost.
A supply line in a wall is easier to access than a slab leak under the foundation. Slab leaks require specialized detection and repair, which adds to the cost.
If mold has already started growing, remediation is required before restoration. That adds time and cost, but it is necessary to protect your health and the structure.
“A supply line burst under our kitchen sink at 6 a.m. and flooded the whole first floor. We called and a crew was here in under an hour. They extracted the water, set up drying equipment, and had the pipe repaired the same day. The moisture readings were back to normal in four days. They handled the insurance paperwork too, which saved us a lot of stress.”
Maria G.Homeowner, Olde Naples
✓ Verified“We manage several condos in Pelican Bay and had a slab leak in one of them. The team used thermal imaging to find exactly where the water was coming from and mapped the moisture in the walls. They dried the unit, repaired the pipe, and replaced the drywall. The tenant was able to move back in within a week. Professional and thorough.”
David R.Property Manager, Pelican Bay
✓ Verified“Our irrigation line burst overnight and we woke up to a soaked yard and water seeping into the garage. They pumped out the water, dried the garage and the adjacent room, and fixed the line. What impressed me was the daily monitoring. They came back every day to check moisture levels and did not stop until everything was dry. No mold issues at all.”
Lisa M.Homeowner, Golden Gate
✓ VerifiedMost residential pipe burst cleanup and repair jobs in Naples run $1,200 to $4,500 in 2026, depending on how much water was released and how far it traveled. A small supply line leak that stays in one room is on the low end. A slab leak or a second-floor burst that soaks ceilings and walls pushes toward the higher end. Pipe repair itself is often $300 to $900, with drying and restoration making up the rest.
Shut off the main water valve immediately, then call us at +1 (725) 309-8505. If you cannot find the main, shut off the nearest isolation valve under a sink or at the water heater. Do not run a shop vac near electrical outlets. Move furniture and rugs away from the wet area if it is safe. We will walk you through the rest on the phone while a crew is dispatched.
Yes, most homeowners insurance policies in Florida cover sudden and accidental pipe burst water damage, including extraction, drying, and repairs. The pipe itself is often covered if the burst was sudden, though gradual corrosion may be excluded. We document the loss with photos, moisture readings, and an Xactimate scope so your adjuster has what they need to process the claim.
Extraction usually takes one to three hours. Structural drying runs three to five days, and we monitor daily until moisture readings hit the dry standard. Pipe repair is typically a one-day job. Full restoration, including drywall and paint, adds another two to five days depending on the scope. Most customers are back to normal within one to two weeks.
Water Damage RestorationFull-scope restoration for any water intrusion, from supply line leaks to appliance failures. We handle extraction, drying, and repairs so your Naples property is returned to pre-loss condition.Explore →
Emergency Water RemovalWhen water is still rising, our emergency water removal crews pull it out fast with truck-mounted extraction units and sump pumps. We stop the spread before it reaches more rooms.Explore →
Flood Cleanup and RestorationFloodwater carries contaminants that require antimicrobial treatment and careful disposal. We handle flood cleanup and restoration for Naples properties affected by storms, storm surge, or drainage failures.Explore →
Storm Damage RestorationHurricane winds and heavy rain can compromise roofs and windows, letting water in. We handle storm damage restoration, including tarping, water extraction, and structural repairs after the storm passes.Explore →
Basement Water RemovalBasements and below-grade spaces collect water fast when a pipe bursts or a sump pump fails. We remove standing water, dry the space, and address the source so it does not happen again.Explore →
Crawl Space Water ExtractionCrawl spaces trap moisture and breed mold. We extract water from crawl spaces, dry the area with specialized equipment, and treat for microbial growth to protect the structure above.Explore →
Sewage Backup CleanupSewage backups are a health hazard and require specialized handling. We remove contaminated water, disinfect the area, and restore the space using OSHA-compliant safety protocols.Explore →
Mold RemediationMold can start growing within 48 hours of a water loss. Our mold remediation team removes affected materials, treats the area with antimicrobial solution, and restores the space to a clean, dry condition.Explore →Water is still spreading. Every minute you wait, the damage gets deeper and the repair bill gets bigger. Call us now at +1 (725) 309-8505. We are available 24/7, we answer live, and we dispatch immediately. Licensed, insured, and ready to help.
Get Emergency Help +17253098505 →Call us any time, day or night, at +1 (725) 309-8505. Our dispatchers are available 24/7 and can have a crew at your door within about an hour for emergencies in Naples and surrounding areas. You can also email us at info@waterdamagerestoration.com or stop by our office during business hours.